Thermal annealing induced cave in and formation of nanoscale pits in Ag–TiO2 plasmonic nanocomposite thin film

Ag–TiO₂ nanocomposite thin films on silica glass were prepared through thermal evaporation in combination with RF magnetron sputtering. Thermal annealing induced changes in the optical, morphological and structural properties of Ag–TiO₂ nanocomposites were examined using optical absorption, photoluminescence spectroscopy, Raman spectroscopy, FESEM, AFM and XRD. FESEM and AFM studies revealed cave in of the Ag–TiO₂ thin film at various places leading to the formation nanoscale pits upon thermal annealing at 600 °C. The computed average size of pits was found to be 54 nm. Raman studies indicated 600 °C annealing induced transformation of anatase phase of TiO₂ into anatase/rutile mixed phase TiO₂. Optical absorption spectra showed systematic changes due to the effects of mixed phase formation and variation in the plasmonic behavior upon annealing. PL results of the as deposited Ag–TiO₂ thin film showed peaks at 377, 402, 432 and 486 nm. PL studies of Ag–TiO₂ nanocomposites treated at different annealing temperatures revealed changes in defect concentration in TiO₂. The tentative mechanism for the creation of nanoscale pits in Ag–TiO₂ thin film through thermal annealing was proposed.     

Multicellular Tumor Spheroids (MCTS) as a 3D In Vitro Evaluation Tool of Nanoparticles

Multicellular tumor spheroid models (MCTS) are often coined as 3D in vitro models that can mimic the microenvironment of tissues. MCTS have gained increasing interest in the nano‐biotechnology field as they can provide easily accessible information on the performance of nanoparticles without using animal models. Considering that many countries have put restrictions on animals testing, which will only tighten in the future as seen by the recent developments in the Netherlands, 3D models will become an even more valuable tool. Here, an overview on MCTS is provided, focusing on their use in cancer research as most nanoparticles are tested in MCTS for treatment of primary tumors. Thereafter, various types of nanoparticles—from self‐assembled block copolymers to inorganic nanoparticles, are discussed. A range of physicochemical parameters including the size, shape, surface chemistry, ligands attachment, stability, and stiffness are found to influence nanoparticles in MCTS. Some of these studies are complemented by animal studies confirming that lessons from MCTS can in part predict the behaviour in vivo. In summary, MCTS are suitable models to gain additional information on nanoparticles. While not being able to replace in vivo studies, they can bridge the gap between traditional 2D in vitro studies and in vivo models.     

纳米氧化锌/低密度聚乙烯膜中锌向食品的迁移研究

目的研究纳米氧化锌/低密度聚乙烯膜(low density polyethylene film,LDPE)中锌(Zn)向食品的迁移行为,探究其迁移规律。方法选取2种食品模拟物(3%乙酸及超纯水)及真实食品(食用白醋及瓶装水),在3种不同实验温度下(70、40及20℃),研究锌向食品模拟物的迁移规律。采用扫描电子显微镜(scanning electron microscope,SEM)和原子力显微镜(atomic force microscope,AFM)表征纳米ZnO/LDPE膜的表面形貌。结果锌向酸性模拟物中的迁移率远远大于水性模拟物中的迁移率,其中锌向酸性模拟物中的最大迁移率分别为22.7%,20.3%及18.6%(ZL-1,ZL-2及ZL-2#),向水性模拟物中的最大迁移率分别为9.9%,5.7%及4.9%(ZL-1,ZL-2及ZL-2#);锌向酸性食品的迁移量(1.59~5.03 mg/g)同样高于向水性食品的迁移量(2.98~24.60μg/g);随着纳米ZnO的初始含量变大迁移率变小;而偶联剂的加入对锌的迁移有一定的抑制作用。随着纳米ZnO浓度的增加,在薄膜中观察到纳米ZnO的不规则形貌。结论纳米ZnO/LDPE膜不适合在高温下包装食物,且其在酸性食品中的安全隐患高于水性食品。     

Heat Transfer Analysis of MHD Power Law Nano Fluid Flow through Annular Sector Duct

Flow and heat transfer analysis of an electrically conducting MHD power law nano fluid is carried out through annular sector duct,under the influence of constant pressure gradient.Two types of nano particles(i.e.Cu and TiO2)are used in power law nano fluid.Strongly implicit procedure,(SIP)is used to simulate the discretized coupled algebraic equations.It has been observed that volume fraction of nano particles,ϕand magnetic field parameter,Ha are favourable for the heat transfer rate,however,both resist the fluid flow.Impact of applied uniform transverse magnetic field exceeds in the case of shear thickening fluids(i.e.n>1)by increasing the value of Ha as compared to that in shear thinning fluids(i.e.n<1).Therefore,enhancement in heat transfer rate is comparably more in shear thickening fluid.Furthermore,comparable limiting case study with published result is also carried out in this research paper.     

Embedding Ag or Au nanoparticles within the nano-sized wall of YbPO4:Er3+ inverse opals and resulting enhanced upconversion luminescence

Metal nanoparticles preparation in the interior of nanoscale skeleton of inverse opals made up of crystallized matrix is more difficult than the preparation of pure inverse opals. In the present work, the Ag or Au nanoparticles embedded YbPO₄:Er³⁺ inverse opals were prepared by a simple approach, which involved the infiltration of opal template by using the transparent YbPO₄:Er³⁺ sol including silver nitrate or chloroauric acid and the sintering at high temperature. The 20–30?nm Au or 5–10?nm Ag nanoparticles were formed in the interior of nanoscale skeleton in the YbPO₄:Er³⁺ inverse opals, and the Ag or Au nanoparticles embedded YbPO₄:Er³⁺ inverse opals were prepared. The influence of Ag or Au nanoparticles on the upconversion photoluminescence of YbPO₄:Er³⁺ inverse opal was studied, and the upconversion luminescence enhancement induced by the Ag or Au nanoparticles was observed. The mechanisms of upconversion luminescence enhancement of YbPO₄:Er³⁺ inverse opals induced by Ag or Au nanoparticles were discussed. The enhancement of upconversion luminescence induced by Ag nanoparticles was attributed to the enhancement of the excitation field, and the enhancement of upconversion emission induced by Au nanoparticles was related to the increasing of the radiation decay rate of Er³⁺.     

Plasmonic-excitonic multi-hybrid glass-based nanocomposites incorporating Ag plus core-shell CdSe/CdS and alloyed CdSxSe1−x nanoparticles

Successful fabrication of glass-based hybrid nanocomposites (GHNCs) incorporating Ag, core-shell CdSe/CdS and CdS_xSe_1?x nanoparticles (NPs) is herein reported. Both metallic (Ag) and semiconductor (CdSe/CdS) NPs were pre-synthesized, suspended in colloids and added into the sol-gel reaction medium which was used to fabricate the GHNCs. During fabrication of the nanocomposites a fraction (20–60%) of core-shell CdSe/CdS NPs was alloyed into CdS_xSe_1?x (0.20 < x < 0.35) NPs without changing morphology. Modulation of in situ alloying is possible via the relative content of organics added into the sol-gel protocol. Within colloids Ag (core-shell CdSe/CdS) NPs presented average diameter and polydispersity index of 49.5 nm (4.2 nm) and 0.41 (0.21), respectively. On the other hand, the Ag (core-shell CdSe/CdS) NPs’ average diameter and polydispersity index assessed from the GHNCs were respectively 51.5 nm (4.1 nm) and 0.43 (0.25), revealing negligible aggregation of the nanophases within the glass template. The new GHNCs herein introduced presented two independent excitonic transitions associated to homogenously dispersed semiconductor NPs, peaking around 420 nm (core-shell CdSe/CdS) and 650 nm (CdS_xSe_1?x) and matching the plasmonic resonance (Ag NPs) in the 400–500 nm range. We envisage that the new GHNCs represent very promising candidates for superior light manipulation while illuminated with multiple laser beams in quantum interference-based devices.     

Photocatalytic desulfurization of dibenzothiophene by NiCo2O4 nanospinel obtained by an oxidative precipitation process modeling and optimization

This paper reports for the first time, synthesis of NiCo₂O₄ nano spinel by green oxidative precipitation and its performance in photocatalytic desulfurization of dibenzothiophene (DBT) from gas oil model at different process conditions under visible light. The as-produced nanostructure was characterized by X-ray diffraction, Fourier transform infrared, UV–VIS diffuse reflective spectroscopy, energy-dispersive X-ray spectrometry and scanning electron microscopy. The experiments for the study of different photocatalytic conditions were designed by response surface methodology and a second-order regression model was developed with a determination coefficient (R²) of 0.9769. Pareto analysis predicted that the relative importance of process factors for DBT removal is as follows: irradiation time?>?reaction temperature?>?photocatalyst dosage?>?DBT concentration. The promising results for DBT removal were concluded by photo desulfurization over the nano spinel. The study confirmed that nano spinels could be an alternative and cheap photocatalyst for desulfurization from the oil products.     

Electrodeposited and characterization of Ag–Sn–S semiconductor thin films

Thin film of silver tin sulfides (Ag–Sn–S) has been deposited on indium tin oxide coated glass (ITO) substrates using potentiostatic cathodic electrodeposition technique. New procedure for the growth of Ag–Sn–S film is presented. An electrolyte solution containing Silver Nitrate (AgNO₃), Tin(II) Chloride (SnCl₂) and Sodium Thiosulfate (Na₂S₂O₃)in acidic solution (pH ~2) and at temperature of the bath 55 °C were used for the growth of Ag–Sn–S thin film. Prior to the deposition, a cyclic voltammetry technique was performed in binary (Ag–S, Sn–S) and ternary (Ag–Sn–S) systems. This study was carried out to examine the behavior of electroactive species at the electrode surface. Based on these results, the cathodic applied potential was fixed at −1000 mV versus Ag/AgCl to obtain a uniform and good adhesion of ternary thin film. After that, structural, morphological and optical performances of films have been investigated. The X-ray diffraction patterns of the samples demonstrate the presence of the orthorhombic phase of Ag₈SnS₆ at applied potential of −1000 mV versus Ag/AgCl. Based on the scanning electron microscopy (SEM), it was found that the surface morphology and grain size were strongly influenced by the presence of Sn and/or Ag in the electrolyte bath. The band gaps of binaries and ternary compound are evaluated from optical absorption measurements. Band gap of Ag₈SnS₆ determined from transmittance spectra is in the range 1.56 eV. Flat-band potential and free carrier concentration have been determined from Mott–Schottky plot and are estimated to be around 0.18 V and 2.21×10¹⁴ cm⁻³ respectively. The photoelectrochemical test of Ag₈SnS₆ was studied and the experimental observations are discussed in detail.